text.skipToContent text.skipToNavigation
1mm Duratech Solder - 200gm 1mm Duratech Solder - 200gm NS3010 16.95 In stock

1mm Duratech Solder - 200gm

CAT.NO:NS3010

1mm Duratech Solder - 200gm

CAT.NO:NS3010

- 1mm- 200 gram reel- Resin Core 60% Tin / 40% Lead...
Add to wishlist

In Stock Notification:

You'll be notified as soon as this item is back IN STOCK

or Cancel

Unsubscribe from this in stock notification

or Cancel

Special Notification:

You'll be notified as soon as this item is on special

or Cancel

Unsubscribe from this on special notification

or Cancel

Notify me when on special
	
$16.95
Bulk Pricing:
1-2 $16.95
3-5 $14.95
6+ $13.45
In Stock



Description
1mm 200g reel Resin Core 60% Tin / 40% Lead

Handy Tip Cheap and Nasty (But effective flux)

Before solder wire had a core of flux in it you had to use a paste, or a liquid flux. The liquid was Zinc Chloride. It was made by getting some hydrochloric Acid (Muriatic Acid) and dropping zinc into it. The most common source of zinc was bits of galvanised iron. When you dropped the zinc into the acid bubbles would come off. When the bubbles stopped, the zinc had replaced the Hydrogen in the acid. The Hydrochloric acid was then called “killed spirits.” The killed spirits was great flux to solder together, say, brass or copper – or even galvanised iron. Of course this was potentially dangerous but that was what you did in the good old days! P.S. don’t forget to wear safety goggles if you attempt this.

Specifications
Solder and Accessories

Size 1mm
Service Aid Chemicals

Composition 2 Lead
Percentage 2 40%
Service Aid Solder Wire
Physical state Wire
Net Mass 200g
Chemical container type Roll
Composition 1 Tin
Percentage 1 60%
Articles


From $10 a weeklearn more
 
DELIVERY

✔ In Stock

Out of Stock

Low Stock

Standard Freight: 2-5 working days for most areas
Express Freight: 1-2 days for most areas
Delivered Today: If ordered before 12pm Super fast delivery (limited areas)


CHECK IN-STORE