text.skipToContent text.skipToNavigation
Low Voltage Battery Isolator Low Voltage Battery Isolator MB3678 4.30

Low Voltage Battery Isolator

CAT.NO: MB3678

	
$4.30
WAS $69.95 Save $65.65
Bulk Pricing:
1-1 $4.30
2-3 $4.30
4+ $4.30
In Stock


Have a question about placing your order?
Call our Techstore
on 1800 022 888

Description
With microprocessor control, this indispensable device monitors the output voltage of any 12V lead-acid battery. If the terminal voltage drops below 11.9V, the battery will be automatically disconnected to prevent deep-cycle damage and finding a dead battery when you go to start your vehicle. Very easy to install, it can be mounted on the top or beside the battery and can be manually overridden if required. Essential for boats, camping, caravans, RVs, 4WD, solar power systems or any application that has either dual battery setup or single battery with accessories being run.

• High cranking capacity
• Low power consumption
• 1 year warranty
• Mounting hardware included

Specifications:
• Supply voltage: 12VDC
• Power consumption (standby): 15mA
• Rated input/output current: 100A
• Cranking current: 350A
• Operating temperature range: -25 - 125°C
• Dimensions: 85(H) x 55(W) x 35(D)mm

Installation Note:
This device is designed to be connected directly to the battery.

If this is not possible due to mounting restrictions, a very short heavy gauge cranking cable must be used between the battery and the isolator.

Specifications
Packaged Dimensions
Packaged Volume 0.864L
Packaged Weight 0.385kg
Packaged Length 16cm
Packaged Width 12cm
Packaged Height 4.5cm
Warranty: 36 Months
Downloads