text.skipToContent text.skipToNavigation
Dwell Tacho DMM Dwell Tacho DMM QM1440 1.64

Dwell Tacho DMM

CAT.NO: QM1440

  • Dwell Tacho DMM
DISCONTINUED
Dwell Tacho DMM

Dwell Tacho DMM

CAT.NO: QM1440

NOTE: This product is discontinued. Please see our replacement QM1444
Add to wishlist
	
$1.64
WAS $39.95 Save $38.31
Bulk Pricing:
1-2 $1.64
3-5 $1.64
6+ $1.64
Out Of Stock



Have a question about placing your order?
Call our Techstore
on 1800 022 888

Description
Features include a 3.5 digit LCD display with automatic zero adjustment, low battery warning and auto power off after 15 minutes. Includes dwell angle and RPM (x1, x10) for 4, 5, 6 and 8 cylinder engines.

• RPM x 1, x10
• Dwell angle
• Resistance
• DC volts
• 15 amp DC
• Continuity buzzer
• Holster included
• Probe clips

Comprehensive user guide describes how to:

• Use dwell angle function
• Dual point distributors
• Set idle speed and mixture setting
• Adjust fast idle speed
• Air fuel ratio test
• Air filter test
• Cylinder power balance test
• Positive crankcase ventilator (PCV) test
• Distributor centrifugal advance test
• Heavy and light load battery test
• Charging system test
• Starter circuit
• Alternator output voltage
• Generator output voltage
• Cutout relay
• Alternator diode test
• Condenser leakage test
• DC voltage: 200mV, 2V, 20V, 200V
• Impedance: 10MΩ
• Resistance: 200Ω, 2K, 20K,200K, 2MΩ, 20M
• Overload protection: 250VDC / AC RMS
• DC current: 200mA, 15A
• Overload protection: Fuses 0.2A 250V, 20A 250V
• Tachometer: 0-10,000 RPM
• Dwell: 4 cylinder 0 - 90, 5 cylinder 0 - 72 6 cylinder 0 - 60, 8 cylinder 0 - 45
• Duty cycle: 0.1 - 99.9 ±2%
• Test current: 1.0 ±0.6mA
• Test voltage: Approximately 2.4V
• Size: 165 x 78 x 45mm

Audible continuity beeper and diode test Supplied with lead, rubber holster and comprehensive instructions

Specifications
Warranty: 3 Months