text.skipToContent text.skipToNavigation
Duinotech Duinotech Tri-Axis Digital Tilt Sensor Duinotech Tri-Axis Digital Tilt Sensor XC3732 7.95 In stock

Duinotech Tri-Axis Digital Tilt Sensor

CAT.NO: XC3732

  • Duinotech Tri-Axis Digital Tilt Sensor
  • Duinotech Tri-Axis Digital Tilt Sensor
ON SPECIAL NOW
Duinotech Tri-Axis Digital Tilt Sensor

Duinotech Tri-Axis Digital Tilt Sensor

CAT.NO: XC3732

Detect direction (transverse/longitudinal), as well as free fall, pulse, and shake detection.
• 12 bit and 8 bit digital outputs
• I2C digital output interface
Add to wishlist

In Stock Notification:

You'll be notified as soon as this item is back IN STOCK

or Cancel

Unsubscribe from this in stock notification

or Cancel

Special Notification:

You'll be notified as soon as this item is on special

or Cancel

Unsubscribe from this on special notification

or Cancel

	
$7.95
WAS $9.95 Save $2.00
Bulk Pricing:
1-1 $7.95
2+ $7.95
In Stock



Description
Raspberry Pi Compatible

Arduino® Compatible


Use this high performance acceleration sensor in your project to detect direction (transverse/longitudinal), as well as free fall, pulse, and shake detection. The on-board MMA8452Q is a smart low-power, three-axis, capacitive micromachine acceleration sensor with 12-bit resolution. Users are able to set a range of ±2g, ±4g, or ±8g, which can output high-pass filtering data and non-filtered data in real-time. An embedded function can also be used to generate an inertial wake-up interrupt signal, which enables MMA8452Q to maintain a low-power mode in the static state while monitoring the event.

Features:
• 12 bit and 8 bit digital outputs
• I2C digital output interface (up to 2.25MHz with 4.7kΩ pull-up resistor)
• Two programmable interruption pins applied to six interruption sources
• Three motion detection embedded channels: free fall detection, pulse detection, shaking detection
• Direction (transverse/longitudinal) detection with setting lag compensation
• Automatic arousal and auto-dormant ODR can be automatically altered
• High-pass filtering data can be exported in real time

Specifications:
Interface Voltage: 1.6V to 3.6V
Optional Dynamic Range: ±2g/±4g/±8g
Output Data Rate (ODR) Range: 1.56Hz to 800Hz
Noise: 99μg/√Hz

Specifications
Arduino Modules

Required Supply Voltage 1.95V-3.6V
DC Current Rating

DC current rating 6µA
DC Current Surge Rating 165A
Product Dimensions

Length 35mm
Width 20mm
Height 7mm
Weight 2.6g
Articles


From $10 a weeklearn more
 
DELIVERY

✔ In Stock

Out of Stock

Low Stock

Standard Freight: 2-5 working days for most areas
Express Freight: 1-2 days for most areas
Delivered Today: If ordered before 12pm Super fast delivery (limited areas)


CHECK IN-STORE