Arduino

Micro servo motor, perfect for use with XC4618 Pan and Tilt bracket. Small enough to connect directly to an Arduino Board for experimenting.

Mid-sized prototyping breadboard with 400 tie points. • 83mmx55mm

Arduino Compatible Breadboard with 830 Tie Points

The Duinotech UNO r3 is a 100% Arduino™ Compatible development board. Its' stackable design makes adding expansion shields easy. The most popular and versatile main board board in the range to get you building your project.

These handy relay modules provide the easiest way to use your Duinotech development board to control switching of real world devices.

Build a stackable shield, or make your current shield stackable.

Using the powerful L298N Dual Motor Driver, this module allows full control of two DC motors or one stepper-motor in your project.

Just like the headers on the Duinotech main boards.

This tiny module charges one lithium cell from a 5V supply. Ideally paired with XC4512 DC-to-DC Converter Module to create a project that runs on a single lithium cell and recharges by USB.

A small and versatile motor and driver set. 5VDC stepper motor controlled by the ULN2003 driver can be used with any Arduino® or compatible boards via jumper leads. Four-phase LED indicates the status of the stepper motor.

A Mini-B USB to 6-pin serial port module used to communicate with Arduino boards and modules.

An LCD (Liquid Crystal Display) screen module that fits 2 rows of character down and 16 across, and includes a backlight plus a variety of button controls via built in keypad.

This motor controller shield sits directly on top of the UNO layout. It has 2 x 5V Servo ports, 4 Bi-Directional DC Motor ports with 8-bit speed resolution. Alternatively, it can control 2 Stepper motors using 2 motor ports per Stepper.

Our range would not be complete without a microphone sensor module.

Need a red laser light for your latest project? Here it is! Everything you need to drive the laser diode is included on the board. Just connect it to 5VDC and you’re good to go! Use it with our light sensor module (XC4446) to make a laser tripwire.

With a more efficient regulator than that built into the Arduino UNO development boards, use this module to run your 5V Duinotech projects from a 6V, 9V or even 12V supply.

Fully compatible with all the features of the full-sized development boards but on a tiny DIP-style form.

This module is an inexpensive solution for an obstacle avoidance sensor, perfect for robotic projects and very easy to interface directly with Arduino® and compatible boards.

Sense magnetic presence, rotating wheels and magnets, door sensors and any other magnets near this module.