text.skipToContent text.skipToNavigation
4.7uF 50VDC Electrolytic RB Capacitor 4.7uF 50VDC Electrolytic RB Capacitor RE6058 0.35 In stock

4.7uF 50VDC Electrolytic RB Capacitor

CAT.NO:RE6058

4.7uF 50VDC Electrolytic RB Capacitor

CAT.NO:RE6058

Electrolytic RB Capactior
Add to wishlist

In Stock Notification:

You'll be notified as soon as this item is back IN STOCK

or Cancel

Unsubscribe from this in stock notification

or Cancel

Special Notification:

You'll be notified as soon as this item is on special

or Cancel

Unsubscribe from this on special notification

or Cancel

Notify me when on special
	
$0.35
Bulk Pricing:
1-24 $0.35
25-99 $0.25
100+ $0.21
In Stock



Description

An electrolytic capacitor uses an electrolyte (a liquid or gel containing a high concentration of ions) to achieve a large capacitance than the other capacitor types. These electrolytic capacitors are polarized, meaning that the voltage on the positive terminal must always be greater than the voltage on the negative terminal. They are commonly used as filters in devices in various power supplies to reduce the voltage ripple as well as input and output smoothing as an LPF.

Features:

Ripple Current mA: 35
Mounting: RB - PC Mount


Handy Tip Capactitor Types

Ceramic:
These offer low cost and high capacitance in a small physical size. Normally there are two types, the ‘High Stability Temperature Compensating’ type and the ‘Bypass and Coupling’ type. The former for use in resonant circuit and filter applications, with a value largely independent of voltage and frequency. The latter is for use in less critical applications, as they are less stable and have non-linear temperature characteristics and are somewhat voltage dependent.Polyester:
These type offer good stability, a large range of values at low cost, and are the most widely used capacitor for general purpose.Polycarbonate:
These have a low temperature coefficient, low dielectric loss at high frequency and excellent temperature stability characteristics.Polystyrene:
These offer tight tolerance and are highly stable; making them suitable for very stable tuned circuits and oscillators.Polypropylene:
This type has a very low dielectric loss and are particularly suitable in audio circuits and sample-and-hold circuits.Mylar:
This is the Du Pont tradename for polyester. They usually have an aluminium film deposit on the dielectric and are called metallised polyester.

Specifications
Product Dimensions

Diameter 5mm
Height 11mm
Articles


From $10 a weeklearn more
DELIVERY

✔ In Stock

Out of Stock

Low Stock

Standard Freight: 2-5 working days for most areas
Express Freight: 1-2 days for most areas
Delivered Today: If ordered before 12pm Super fast delivery (limited areas)

CHECK IN-STORE