text.skipToContent text.skipToNavigation
25k Ohm Linear (B) Double Gang 24mm Potentiometer 25k Ohm Linear (B) Double Gang 24mm Potentiometer RP3708 4.50 In stock

25k Ohm Linear (B) Double Gang 24mm Potentiometer

CAT.NO: RP3708

With imperial standard shaft & bushings made to our rigid engineering specifications. The potentiometers are full size - 24mm diameter types . Pow...
	
$4.50
Bulk Pricing:
1-9 $4.50
10-49 $3.60
50+ $3.15
In Stock


Have a question about placing your order?
Call our Techstore
on 1800 022 888

Description
With imperial standard shaft & bushings made to our rigid engineering specifications. The potentiometers are full size - 24mm diameter types . Power rating is 0.5W max. They have genuine 6.35mm (1/4) shafts with a flat machined 25% of the diameter for grubscrews or interference fit knob mounting. The shaft is a generous 38mm long. The bush is a 3/8 32 T.H.D. type which we believe is necessary for good fixing to a panel. Another important feature of the pots is their PCB mount capability. The pins are rigidly mounted on phenolic with the centre pin offset from the two outer terminals. When soldered into a PCB, the pot is quite rigidly held on its own. Double gangpots are held in 6 places and require no extra mechanical mounting assistance. The pins are large enough to terminate screened cable, etc., if the job requires hard wiring. An engineering drawing appears below. You may safely use it to design PCB artwork etc., as we have standardised this design.Value25K

Specifications
Packaged Dimensions
Packaged Volume 0.0613L
Packaged Weight 0.018kg
Packaged Length 3.5cm
Packaged Width 2.5cm
Packaged Height 7cm