12/24VDC LED Strobe light with magnetic/permanent base
Have a question about placing your order?
Call our Techstore
on 1800 022 888
Keeping safe on a worksite, or attracting attention to your vehicle at an event - whatever your purpose - this multi-pattern strobe is versatile and couldn’t be easier to install. Two strong magnets hold it firmly in place on your roof and a curly-cable to cigarette lighter plug means you can power it without any special wiring. Inside the protective plastic case are 24 high power amber LEDs - 6 banks of 4LEDs each to be precise. There are 10 different display patterns, so you can select the most attention-grabbing one for your situation. Modes include clockwise / anticlockwise rotation, side to side, fade in/out, and more. Two rubber feet on the bottom of the unit cover powerful magnets and protect your paintwork. If you prefer to mount it permanently however, they unscrew for a clean, flush mount. The cigarette lighter plug incorporates an on/off switch with LED power indicator, as well as a switch for selecting the display mode. Of course, please make yourself aware of any local laws for using external lighting on vehicles, on and off public roads.
- 24 x 1W High Power Amber LEDs
- 10 Selectable Flash Modes
- 12 or 24VDC Powered
- Suitable for trucks too
Power: 12 / 24VDC
Cable: 1m curly cable with cigarette lighter plug
Mounting: Magnetic feet, or permanent screw mount
Dimensions: 280(W) x 165(D) x 62(H)mm (including mounting feet)
There are 10 available flash patterns.
|2||Burst, Fade In-Out/Solid, Fade In-Out|
|4||Burst, Alternating (Side to Side)|
|5||Burst, Alternating, Diagonal (Front to Back)|
|6||Burst, Dual Rotating|
|7||Burst Hold / Burst Side to Side|
|8||Burst Hold / Single Hold|
|9||Burst, Single Rotating|
|10||Burst, Single Rotating|
Note: Press pattern button 0.5 seconds for next pattern.