Shipment & delivery information
Your order can be delivered to anywhere throughout Australia by either standard (road) freight or premium (express) delivery.
Standard/Road Freight: 2 - 5 working days*
Delivery Charges: Under $70 $9 $70+ Free
Premium/Express Freight: Next working day for selected Metro area orders placed before 2:45pm AEST, 2-3 days for other areas*
Delivery Charges: Flat rate $16
* Freight delivery times stated are for average volume items with total order weight under 5kg for metro areas in eastern states. Additional delivery time may result for some deliveries. Please allow extra time for delivery to western states. Premium freight is not available on oversized or bulky items. Contact the Techstore should you require more details.
Goods cannot be delivered to a post office box via an express courier service. If shipping to a PO Box you must select standard delivery during checkout.
Company policy is that we do not under any circumstances issue instructions to our couriers to leave deliveries unattended when no one is at the delivery location.
For unusually large or bulky orders our customer service staff may contact you if any additional freight costs are needed.
Transit goods insurance
If you wish to insure, it will cost $1 for every $100 value or PART THEREOF. In other words if your order is for $145.00 the insurance will be $2.00. This insurance covers goods DAMAGED in transit. We do not automatically insure unless you specify it during the checkout. If you don't select insurance you are NOT insured.
We deliver to parcel lockers around Australia.
With imperial standard shaft & bushings made to our rigid engineering specifications. They have genuine 6.35mm (1/4) shafts with a flat machined 25% of the diameter for grubscrews or interference fit knob mounting. The shaft is 38mm long. The bush is a 3/8 32 T.H.D. type which we believe is necessary for good fixing to a panel. Another important feature of the pots is their PCB mount capability. The pins are rigidly mounted on phenolic with the centre pin offset from the two outer terminals. When soldered into a PCB, the pot is quite rigidly held on its own. Double gangpots are held in 6 places and require no extra mechanical mounting assistance. The pins are large enough to terminate screened cable, etc., if the job requires hard wiring. An engineering drawing appears below. You may safely use it to design PCB artwork etc., as we have standardised this design.
|Potentiometer Gang Number||Dual gang|
|Log or Linear?||Linear|
|Potentiometer Knob Type||Imperial D|
|Potentiometer Terminal Type||Solder Legs|
|Potentiometer Shaft Length||38.5mm|
|potentiometer nut size||24mm(3/8inch 32THD)|
|Passive mount type||Panel,Through Hole|
|Passive connector type||Solder Legs|
|Component package||Metal can|
|Passive number of legs||3|
|Passive marking code||Number code|
|AC Voltage rating||150V|