Low input capacitance high voltage oscilloscope probe designed and calibrated for use with instruments having an input impedance of 1M-ohm shunted by 10pF. It may be compensated for use with instruments having an input capacitance of 15 to 35pF. This probe suits all of the oscilloscopes in our range. Supplied with sprung hook, channel identifier clip, ground lead, insulating tip, IC tip, measuring tip, BNC adaptor, and adjusting tool.

Specifications
Attenuation Ratio: 100:1
Bandwidth: DC to 250MHz
Rise Time: 1.4nS
Input resistance: 100M-ohm when used with oscilloscopes with 1M-ohm input
Input capacitance: 5.5pF (approx.)
Compensation range: 10 to 35pF
Working Voltage: 1200VDC incl. Peak AC derating with frequency

Safety: Meets IEC1010-1 CAT.II
Cable length: 1.2m