text.skipToContent text.skipToNavigation
240V 10A Motor Speed Controller Kit with Soft Start 240V 10A Motor Speed Controller Kit with Soft Start KC5526 159.00 In stock

240V 10A Motor Speed Controller Kit with Soft Start

CAT.NO: KC5526

Refer: Silicon Chip Magazine Feb/Mar 2014 A significant improvement on our successful KC-5478 10A Motor Controller Kit. Designed for controlling the sp...
	
$159.00
Bulk Pricing:
1-4 $159.00
5+ $142.95
In Stock

Have a question about placing your order?
Call our Techstore
on 1800 022 888

Description
Refer: Silicon Chip Magazine Feb/Mar 2014
A significant improvement on our successful KC-5478 10A Motor Controller Kit. Designed for controlling the speed of power tools such as electric drills, lawn edgers, circular saws, routers or any other appliance with a universal (brush-type) motor, rated up to 10A. The new design is easier to build, has a smoother control, more "grunt" at low speed, features soft start to avoid dangerous kick-back, and improved overload protection. The case has the tricky cut-outs pre-machined, but a little bit of  fine tuning may be required to complete the project. Kit includes screen printed machined case, double-sided PCB, GPO, programmed micro and electronic components.

* Extremely smooth and precise motor speed control
* Speed can be controlled from zero to maximum
* Superb speed regulation under load
* Adjustable speed regulation with feedback control
* Excellent low-speed motor operation
* 2300W (10A) rating
* Cycle-by-cycle current overload protection
* Over-current limiting
* Soft starting
* NTC Thermistor for initial surge current limiting
* Fused protection
* Rugged case with interference suppression included
* For 230VAC brush (universal) motors

Specifications:
* Rating: 10A, 230VAC
* Speed adjustment: Zero to motor’s maximum
* PWM frequency: 980Hz
* Cycle-by-cycle current limiting: 23A peak
* Average current limiting: 15A
* Soft start rate: Up to 2.54s from zero to full speed
* NTC thermistor: 10-ohm at 20°C, <0.1-ohm@10A

Note: Not suitable for inducted or shaded-pole motors

Specifications
AC Power Supply or Controller Kit
Output terminals 3 Pin AU/NZ Mains Plug / Socket
Output voltage selection Potentiometer
Kit
Kit Form Full Form (circuit and enclosure)
Kit Group General Projects
Difficulty Complex
Contains High Voltage Components
Instructions Included
Application Field Motor Speed Controller
Estimated Construction Time 4hr
Tools required Soldering Iron
Long Nose Pliers
Flat Head Screwdriver
Recommended Minimum Age 18Yr
AC Voltage Rating
AC Voltage rating 240V
AC Current Rating
AC current rating 10A
Power Supply
AC_Max_Current 10A
AC Voltage 230V
Packaged Dimensions
Packaged Volume 3.68L
Packaged Weight 1.15kg
Packaged Length 23cm
Packaged Width 16cm
Packaged Height 10cm